Oatmeal, Milk, and Honey Soap Kit

Our Melt & Pour Soap Making Kit with everything you need to start making your very own soap! We wanted you to have access to the recipe and ingredients in case you try it out and want to keep making it. Over and over! We love this Oatmeal Soap Kit because it is so simple but makes lovely, moisturizing soap. 

What’s Included:

• Plastic Soap Mold
• Oatmeal SFIC Melt & Pour Soap Base
• Oatmeal, Milk, and Honey Fragrance Oil
• Yellow Personal Care Dye

Instructions:

Remove the shrink wrap from the SFIC Melt & Pour soap base block. Dice this block into square chunks or slice it for easier melting.

Place these pieces in a heat safe bowl or glass measuring cup. Melt in the microwave in increments of 1 minute, stirring with silicone spatula until no chunks remain and consistency is smooth. Alternatively, you can melt the block using the double boiling method (boiling a pot of water on the stove, placing the heat safe bowl with the block in it over the water, stirring until melted). 

Once the consistency is smooth, add 1 tablespoon of fragrance oil (about 60 drops) to the melted base. Stir for at least one full minute. 

Add 5-7 drops of personal care dye to your mixture. Stir for at least one full minute. 

You can now carefully pour this liquid mixture into the wells of your mold. It is best done slowly to avoid spilling or splashing hot liquid onto your skin. 

Allow the soap mixture to fully harden/set for at least 4 hours but ideally overnight. Demold by flipping the mold over and pushing on the backs of the soaps through the plastic. If the soaps do not release easily, run hot water or apply heat (with a blow dryer or heat gun) to the outside of the mold. Do not heat the soaps directly as they will melt again.